Table of Contents Show
- What Is an RV Sewer Hose Support?
- Why Do You Need an RV Sewer Hose Support?
- Are RV Sewer Hose Supports Required in RV Parks?
- Best RV Sewer Hose Support Products to Keep Things Flowing Smoothly
- Can You Make a DIY Sewer Hose Support?
Having an RV sewer hose support is an important yet overlooked part of RVing. If your sewer hose is currently lying on the ground, you’ll want to keep reading! After all, do you really want sewage sitting just outside your RV in a plastic tube? Probably not!
What Is an RV Sewer Hose Support?
An RV sewer hose support goes underneath your sewer hose. Supports have varying heights to provide a downward angle from your RV to the sewer connection. They start tall and then slowly get shorter as you go from the RV end to the connection end.
This ensures water and all the other stuff keeps flowing rather than sitting stagnant in the middle of your hose.
Why Do You Need an RV Sewer Hose Support?
You need a sewer hose any time you don’t have a downward slope from your RV to the sewer connections (which is pretty much all the time). If your hose just sits on the ground, not everything will flow into the sewer. The result is a horrible stench. (Trust us, we’ve had neighbors without a sewer hose support before!)
It’s imperative to have an RV sewer hose support when RVing in below freezing temperatures. Otherwise, any liquid left in your hose will freeze solid and expand. This will leave the pipe unusable and create a pretty nasty mess.
Supports also keep your hose off the ground, so your hose is free of dirt and mud. It also prevents damage because no one steps on it, and it doesn’t rest on a sharp surface. Your RV sewer hose isn’t something you want to puncture, after all!
Wondering if there are any other sewer accessories that will make this job less crappy? Check out our list of the top RV sewer accessories.
Are RV Sewer Hose Supports Required in RV Parks?
Many RV parks don’t require RV sewer hose supports, but just because they aren’t required doesn’t mean you should go without!
Best RV Sewer Hose Support Products to Keep Things Flowing Smoothly
If you want to avoid a smelly, messy situation, keep reading for our top choices.
Camco Sidewinder RV Sewer Hose Support
- Protects and Supports Your RV Sewer Hose: Lifts and guides your sewer hose to help waste move downhill; Provides stable,...
- Compatibility: Fits up to a 15-foot RV sewer hose; Works with all 3-inch diameter hoses
Here is a superb choice for an RV sewer hose support. In fact, it’s the one we have, and we’re very satisfied! It’s simple to use and store, and it does the job right.
The Camco Sidewinder support is lightweight and comes with an easy-to-use plastic handle for storage. When you finish with it, just snap on the handle, and it keeps the entire support in place during travel.
This sewer hose support has a cradle-like design. It keeps your sewer hose in place while dumping as well. Some supports have shallow grooves that your hose sits on, so you have to use straps to keep the hose from falling off. But the Camco Sidewinder eliminates this frustrating hassle.
The highest point on this RV sewer hose support is 7.25 in, and the lowest is 4 in, so can set it up to meet your needs at almost any campsite. Since it’s flexible, you can also wind it around obstacles as needed.
The most popular length is 15 ft, but Camco offers options from 10-30 ft. You can also purchase an adjustable kit if desired.
Valterra Slunky Sewer Hose Support
- RV SEWER HOSE SUPPORT: Elevated design supports your drainage hose and promotes better draining
- IMPROVED DESIGN: 26% wider and 30% deeper for increased stability and a smoother overall RV experience
Another solid choice is the Valterra Slunky RV sewer hose support. The overall design is similar to the Camco, but there are some unique features. One is the serrated feet. These feet provide extra grip to help keep your hose from wanting to close while it sits waiting to do its job.
The Slunky also has deep grooves where your hose can rest. It eliminates slippage and the need for clips or straps. Its highest point is 7 in, and the lowest is 4.5 in, so you’ll have slightly less flexibility than the Camco. But it’s still a fabulous product.
Slunky offers sewer hose supports ranging from 10-30 ft. It comes with a velcro strap to keep things together during storage.
Can You Make a DIY Sewer Hose Support?
You can basically DIY anything, but that doesn’t always mean you should. RV sewer hose supports are less than $40, and the result will be much better than anything you could DIY. Plus, the cost of materials will probably be close to buying one ready-made, and standard support means improved storage and ease of use.
Did we mention this is for your sewer hose? You know, the one that could otherwise have sewage sitting in it? So, save yourself the hassle, and just buy one; trust us–it’ll be money well spent.
Purchasing an RV sewer hose support is a smart choice. It’ll make your RVing experience more pleasant and less stinky! This innovative product will ensure gravity does its job to get everything out of your hose. It’s definitely worth having. Not only will you thank us, but your neighbors will too!
Last update on 2023-06-09 / Affiliate links / Images from Amazon Product Advertising API
I use a couple 4×4’s and a couple of 2×6’s. Cost was free. And I always have good fall on my hose.